Automative

Learn How To Prepare Your Car for Winter

Winter weather can be harmful to cars, which is why when the harshest conditions come, it is important drivers prepare in advance. Ed Gliss, a driver and technical knowledgeable for Michelin, same the most effective time for automotive owners to start getting ready vehicles for weather condition is within the weeks leading up to Thanksgiving.

“The temperature is dropping; you are starting to stay in the frost overnight. This is a good reminder to winterize your vehicle, ”he said.

There are many things that you can do now to ensure that your car operates successfully throughout the winter months as well as the ability of your car to keep you and your family safe as winter weather is a problem. There are some ways to ensure that your car is ready to withstand the cold weather for a safe driving experience.

Monitor the Engine Coolant and Antifreeze Levels

Antifreeze is a magical substance that protects your vehicle’s engine from solidifying during those times of the year when you feel you are freezing. Coolant systems that are not in the correct proportions will cause overheating due to freezing. Without it, your engine may stagnate. 

The engine coolant should contain a 50/50 mixture of water and antifreeze. People make the mistake of adding up with water during the year, so the antifreeze becomes very thin and freezing in very cold weather. As it gets thinner over time you need to top it off with an antifreeze.

Inspect the pressure of your tires

Good tires are the key to staying safe on the road when the weather is suspicious and snow and ice are falling from the sky. Warm air rises in your tires. The bottom of the tire goes “flat” as it gets colder. Once you start to drive it resolves on its own and the air will start to circulate again. You can check your part to ensure that your tires are in good shape with just a few simple steps.

Check your tire pressure with a straightforward gauge sold at any automobile provide store. Follow your manual’s recommendations for force per unit area, and if your tires want air, fill them up at the gasoline station. We recommend a minimum of 3 mm depth during winter, compared to the legal minimum of 1.6 mm, as it gives a better grip.

Shelter your Car

If you have a garage, use it to cover your car. If you do not have shelter for your car, purchase a car cover from the market. An automotive cover won’t defend you from freeze fluids only, however it’ll keep snow and ice faraway from the windscreen and your paint, and can facilitate defend your automotive from salts that may be used on the roads in your community.

Change wiper fluid in winter

Simple liquids that you use in the spring, summer, and fall often go from useless to worse in winter. As it freezes quickly upon contact with its windshield. When winter comes, replace your fluid for “winter” fluid. Winter fluid is meant for the trials of winter weather and won’t freeze on your screen. In fact, it truly helps loosen ice and snow from your screen, creating it abundant easier to stay things clear.

Clean your Vehicle Windscreen

Thoroughly clean your windscreen inside and out and top up your screen washer fluid with antifreeze. Run your finger down with the wiper blade to check for nipples and tears. Check for any chips in the windscreen, as they can grow in cold weather. Also, touch any chips in the bodywork as salt deposits on the road will attack them. Check the windshield wipers and replace them if they malfunction or harden.

Check Heating System

Confirm that your heating system works correctly and the core does not leak, the blower works and the window defroster is working.

Inspect your Lights

It is important to fully work the headlights and brake lights when dealing with thick winter fog or heavy snow. This helps your own visibility while driving, but also ensures that other drivers are able to see you.

Inspect the Battery System

Check the electrical system of the car, especially the battery and charging system. Cold weather places unusual demands on charging systems.

According to Michelin, Battery capacity reduces significantly in cold weather, so it is important to check the mechanic to make sure it is at peak performance.

It is very important to have a battery that performs well in those cooler temperatures. It is only hard on cells and it robs their battery capacity, ”said Gliss.

Out of the cold, parking, a car in the garage is another way to protect the battery.

Also, in case of unexpected delays keep at least one-quarter of the fuel tank and check for oil. Brakes are fast and responsive to ensure their brake pads, brake discs and brake fluid are to be checked. Ensure that the fan belt and alternator drive belt are tight and not corroded and that the plug and other leads are in good condition and are protected. 

If you do not feel confident making these checks, then any garage should be able to help you.

Automative

How to test PCV Valve and Broken PCV Valve Symptoms

Carmakers tell that you should change and clean the PCV valve after driving every twenty thousand to fifty thousand miles. But do you know what is PCV? Are you answered in NO? Do not worry we will tell you.

When your automotive engine is running, associate degree air-fuel mixture enters in every cylinder. Many powerful explosions manifest itself to unleash the fuel’s energy, manufacturing extremely poisonous and harmful gases. When every combustion method, the valve routes these gases into the exhaust wherever the convertor turns them into a lot of less poisonous fumes before emotional them into the atmosphere.

Still, the tiny low amount of the gas within the combustion chambers finds its manner into the housing (engine block) by manner of pressure run between the piston rings and the cylinder wall.

Left on their own, these vapors and fumes can play disturbance together with your engine. Blow-by gases contain hydrocarbons (unburned fuel), carbon monoxide (partially burned fuel), particulates, water, sulfur, and acid. Together, these substances can corrode any engine metal element they bit, dilute the engine oil, build up to harmful sludge that accelerates components wear and plug little passages and hoses.

The PCV (positive crankcase ventilation) valve is a one-way valve that burns back the crankcase gases that are placed in the engine to ignite. Plugged PCV valves can result in poorer to poor mileage.

Where is the PCV  fixed?

If you have an older engine without a turbo, check at the top of the edge of the valve cover. The valves are often fitted directly with the valve cover on these cars. However, as you already know, the PCV valve is fitted somewhere between the intake and the valve cover. So if you can’t find it on the valve cover, check if you can see any Hodge that is going from the valve cover to the intakes.

How to Inspect PCV Valve

To begin investigation the PCV system in your vehicle, first find out the PCV valve and its related components.

Open the cap of oil when the engine is running. Let your engine run on idle and set off the oil cap. If you’re feeling that the oil cap is sucked to the engine, therefore, it’s tough to get rid of it, you have got an excessive amount of vacuum within the housing that is possibly caused by a faulty PCV valve.

If you take away the oil cap and you’re feeling that the cap is sort of exploding off from the engine, you have got too high and usually, this can be often caused by the PCV valve. But this may even be caused by different issues like worn piston rings, however, it’s a great deal cheaper to visualize the PCV valve.

Spray flammable spray around the PCV Valve. You can spray an inflammable spray round the intake whereas the engine is running to seek out any leaks around the PCV valve or the hoses. If the engine is revving up after spraying around it, you certainly have a leak somewhere on the brink of wherever you applied the spray.

In this case, take away the valve and therefore the hoses and check if you’ll find the leak, detain mind that this is often a fairly dangerous methodology which might cause fires. continually roll in the hay with care and have a hearth fire extinguisher on the brink of you.

Check for defective hoses. Sometimes, when the hoses go bad, the hoses can collapse, blocking the hoses and causing increased oil consumption and increased pressure inside the crankcase. The best way to check this is to have the engine turned on, as the problem may not occur when the engine is off.

Check humidity in hoses. If you’ve got an excessive amount of pressure within the engine that is leading to the engine is unseaworthy oil or smoking blue from the piping, it’s time to examine for any wet build-up within the PCV valve or within the hoses. If you discover any, clean it up and work the elements to your automotive once more and take a look at to envision if it solves the matter. If the matter still insists it’s most likely time to switch the PCV valve.

Symptoms of Faulty PCV Valve.

The positive crankcase ventilation (PCV) valve serves to remove gas from the engine crankcase. The PCV valve directs these gases back into the combustion chambers through the intake. 

A malfunctioning PCV valve will affect the performance of your vehicle, so there are some signs to watch out for before the valve fails completely:

Increased oil consumption and oil spills. Bad PCV valves may leak, causing excessive consumption of oil. In addition, you may notice oil leaking through the seal and dripping onto the floor of your garage. If the PCV valve or the hose protruding from it is blocked by moisture, you will get a very high pressure inside the engine crankcase, which will push the pressure into the cylinder and out of the gasket. If you suddenly find several major oil leaks and increased oil consumption on your car, check the PCV valves and hoses to make sure they are not blocked.

Faulty filters. A filter called a breather element may become defective with hydrocarbons and oil after the PCV valve fails. This is because of the increased pressure buildup in the crankcase, which pushes water vapor through the breather element. 

The water gets mixed with the gas, which causes the buildup and might increase fuel consumption in your vehicle. A method to visualize this half is to physically examine the filter for buildup, in a different way is to live the mileage on your vehicle. If it starts to travel down apparently while not reason, the PCV valve could also be unhealthy.

Poor working function. The malfunctioning PCV valve cannot close all the way, so oxygen can reach the combustion chamber. When this happens, the mixture of fuel and air is diluted, causing your vehicle to deteriorate and bend out. If you notice that your vehicle is leaking oil, consuming a large amount of oil, you have a contaminated filter, or the car is not working so in this case a PCV valve should be seen and replaced.

This will keep your vehicle running smoothly and maintaining your fuel economy where it should be.

Cloud of smokes from the exhaust. If the PCV valve or the hoses area unit blocked the housing can push up oil into the combustion chambers, which can cause oil to burn within the engine and leave through the pipe. this can cause loads of blue smoke from the pipe.

If the PCV valve faulty and inflicting an expensive or lean mixture to the engine, you’ll be able to get symptoms like white or black smoke starting from the pipe looking on what style of mixture drawback the engine has. A brief conclusion is: If you see any strange smoke from the pipe, ensure that the PCV valve is in fine condition.

If you encounter a strange problem with idle or increased oil consumption, then it’s time to check your PCV valve. PCV valves are often located on crankcase covers on older vehicles. Valves are often very inexpensive but replacement may take some time. Clean it yourself by immersing it in a carburetor cleaner. There should be no gum deposits or discoloration on a clean valve. If your PCV valve must be replaced, buy a new valve, remove the old one and replace the new one.

Automative

Tips to Prevent Your Car from Fire Accidents

Nowadays, car fire accidents have become a major problem and headache for the police as well as for the government. Many people died in these accidents. According to a report of the US Fire Administration, almost one in eight fires were responded by the fire department throughout the nation, in a highway vehicle.

Thirty-eight percent of Highway vehicles were the leading cause of the fire. Eighty-three percent of highway vehicles in passenger vehicles catch fire. And forty-five percent was due to the mechanical failure of the car. 

Prevent Your Car from Fire Accidents

Many of the experts believe that car fire was a combination of causes: human causes, mechanical causes, and chemical causes, and they all worked together to create an incredibly dangerous situation. Thousands of people have lost their lives in the last few decades due to car accident deaths. In this section, we will analyze the risk of a vehicle fire and give advice on how to work in these emergencies.

Causes of fire accidents

Knowing these factors can potentially help a car owner to avoid a car fire.

Bad Maintenance of the vehicle

If you are sluggish about maintenance, your car is normally going to be a lot more dangerous, and the car is more likely to catch fire as part of the greater risk you are taking.  Forgetting or neglecting to take proper care of your car can indirectly cause a terrible fire. 

As a result of it, if you let broken elements, leaky seals, or faulty wiring go while not repairs, it will make your automotive heaps a lot of hospitable to the conditions that cause a fireplace. An associate engine with a foul seal is a lot of doubtless to drip risky (and flammable) fluids.

Smoking Cigarettes and Cigar inside the car

Smoking Cigarettes and Cigar inside the car

Smoking is not only harmful to your health but is one of the causes of car fires. The ashes from a burning cigarette can burn the furnishings of your vehicle causing a fire in the car. Push-type car cigarette lighters can also cause a short circuit, resulting in flame under your car.

Combustible material storage in the vehicle

Police always recommend to not store combustible material in the vehicle. Things like a pressurized deodorant bottle or a pressurized air-freshener can get really warm and blast inside the vehicle when your car is parked under the sun resulting in a fire. It is also advisable that you never use the deodorant after smoking in the car to remove the smell because the Deodorant acts as a major fire hazard for your vehicle. So, try to avoid smoking inside the car.

Overheating of the Catalytic Converters

One of the hottest parts of your car continuously runs the entire length of the vehicle exhaust system. Catalytic converters usually get warm over because they are working hard to burn more exhaust pollutants than they were designed from the process. Catalytic converters have to work more to do their job, making it warmer than normal. This causes long-term damage not only to the converter but also to the surrounding parts of the car.

Getting Overheat of the Engines

A car engine may not be so hot that it simply gets caught in flames on its own. An engine may overheat and create internal fluids, such as oil and coolant, increasing hazardous temperatures and starting to exit their designated areas of circulation. 

Aftermarket accessories

It is always advisable by the professional never accessorized your car from un-professional mechanics. Tempering with electronics on your automobile could become a major reason for a short-circuit. Many incidents have been reported in recent times where people install extra led lights, stereo, and many other devices on their automobile and this results in a car fire due to a short-circuit.

An overheating engine needs mechanical attention. There is often a leaky seal or gasket, or radiator is not working properly, or several other things.

Failures and Downfalls of Electrical System

Car batteries area unit problematic, and not simply the hybrid and all-electric vehicle battery pack varieties. A typical car’s custom battery is capable of inflicting many hassles. The battery’s charging cycles will cause explosive element gas to make up within the engine bay, and therefore the electrical current provided by the battery (along with faulty or loose wiring) will turn out sparks that may quickly ignite a fluid drip or leaked vapours. The electrical system’s hazards are not confined to the world below the hood, either.

Fuel leakage in the vehicle

Leaks in the fuel system are the most common reasons for car fires. Fuel leakage can happen on its own and with very little warning. A fuel system leak is indeed dangerous. At only 7.2 degrees Celsius or above, gasoline can catch fire with a simple spark. The best way to reduce the possibility of a fuel system fire is to ensure that the car is properly maintained and to keep it out of the conditions. 

Aftermarket CNG/LPG kits

It is a common scenario in various countries where drivers often install low standard CNG/LPG kits on their vehicles. Most of the time it is done by the unprofessional mechanic which can result in a damaged car because of holes made to fit the CNG kit. These holes act as a passage for the highly flammable fuel through the cylinder to the cabin of the car. This proves as a major fire threat to your car. A factory-fitted or a standard CNG cylinder kit comes with an automatic cut-off on the detection of leakage. However, the aftermarket products only have one best feature which is it is cheaper than the standard product. Hence, they end up being one of the major causes of the fire.    

12 simple steps to prevent your car from fire

1. Maintain your car by mechanic annually

The maintenance is the best way to avoid electrical or mechanical car fire. Also, this will help you to save expensive breakdowns on the road. Take your car to a maintenance shop at least once a year. A mechanic can give you the best advice about the safety of your car and any repairs you make.

2. Keep Sharp Eyes on Electrical System

As we told you two out of three vehicle fires are caused by electrical system failure or malfunction, so maintaining your car’s electrical system is essential to reducing your fire risk. Check your vehicle’s electrical system during your regularly scheduled maintenance, such as an oil change, coolant, antifreeze level or when you receive your annual car inspection. 

3. warning signs

Your car is capable enough to provide an indication of the danger. The most common sign of an engine-related problem is the engine light. It is common for the light to come if there is a lack of oil or if the engine is not working properly. You can prevent your car from catching fire by getting the oil changed on time ( your car will provide warning signs to you of this need). It also alerts you to the need to top up fluid. 

Then, there are a lot of signs to look for that could indicate the problem. The car may start releasing smoke or if you smell the oil burning this also means your vehicle needs maintenance. 

4. Try not to smoke inside your vehicle

If you leave a burning cigarette in your vehicle or if hot ash falls on a flammable substance such as wire or paper. Then, a cigarette can cause a fire.

5. Fix a Fire Extinguisher in your car

A fire extinguisher and fire blanket can help you protect from the fire. Buy a fire extinguisher that is made for an automobile because the cause of a car fire is often related to electrical issues or combustible fuels, which require a different type of extinguisher.

6. Stop to store unwanted trash

Throw the rubbish out and avoid keeping unwanted things in your vehicle. Keeping this stuff in your vehicle will produce a fireplace hazard. Not solely do extra things, particularly crumpled paper, act as fuel if there’s a spark, they conjointly create it easier for you to accidentally leave an ignitable item in your automobile.

7. Park your car in a safe place

The mechanical parts of your car may become hot, and parts of the system may ignite dry materials that they come into contact with. Make sure you do not park around high grass or in an area where materials such as garbage can come into contact with your undercarriage or catalytic converter.

8. Inspect for the broken hoses

Get your hoses checked if you notice that fluids in your car are dropping unexpectedly or your air conditioner has stopped working. Glance under your hood to see if everything is in good condition and connected properly.

9 Change the oil cap if lost

A missing oil or fuel cap can be a hazard because both oil and fuel are flammable. Unnecessary items can come into the system because of absent caps, which may put your vehicle at risk.

10. Check the loosely connected wirings

Check around your engine by looking at the wires. Do not touch or displace anything. Cracked or loose wiring is a huge fire risk, so you need to fix it as soon as possible.

11. Be careful while installing aftermarket products

Many reports indicate that several car fires occur because of poorly installed aftermarket products. Such as your stereo system. A stereo system creates a network of wire which runs all over the car. A single cut in the wiring can lead to a fire.  So, if you want to do any kind of modification in your car always contact the experts. 

12. Remain alert for any burning smell 

Your scenes are the first defence against any threat of fire in your vehicle. It is always advisable to remain alert for any kind of burning smell in your vehicle which could be coming from an initial fire burn. Early detection of fire could help you to prevent a major fire outbreak. 

Some safety tips are there to help you which can prevent you and your car from catching fire. 

To protect yourself is not only a government or police responsibility most of the accident occurs due to the peoples own mistake, who don’t maintain the vehicle properly. A little mistake can put you in a huge problem. If you see any of these signs, stop driving your car and have it checked immediately or visit your nearest mechanic.

Automative

Ferruccio Lamborghini Biography: The Untold Story

Have you ever listened about the Lamborghini? If yes then it is sure you also want to know about who is the creator of this luxury and expensive car. So today we will tell you about its designer. Ferruccio Lamborghini full name was Ferruccio Elio Arturo Lamborghini.

Ferruccio Lamborghini the founder of the Lamborghini car was born on 28 April 1916. In Renazzo, a little village near Bologna, Italy. He belonged to a poor family. Ferruccio Lamborghini parents were the farmer who grew grapes to make the wine. But Ferruccio soon decided that he wanted to do something with mechanics. 

Education of Ferruccio

He started working on his father’s tractor Ferruccio played with a lot of agricultural equipment and invented a lot. One of the inventions made by them burned the entire farm. Later that Ferruccio was then sent to a technical school so that he could accept more machinery. 

When he grew up, his parents arranged for him to go to an industrial college in Bologna. After a few years, he graduated with a degree in industrial engineering and started working in a repair workshop. 

Work and Experience

During World War II, he was recruited to the Italian Air Force in 1940  to working for transportation sections. Where he served as a mechanic in the Italian garrison on Rhodes Island, being a supervisor of the vehicle carrying unit. 

He became a prisoner of war by the British military forces after 1944. That had kept him to work in his motoring department, in this way. Ferruccio had the experience of having cars on the road for the first time, even with limited supplies.

He married Clelia Monti, but his wife died in 1947 while she was giving birth to the child a boy named Tonio. 

Later Second World War

He returned to his hometown after the war and opened a garage in Pieve di Cento. Where he started converting old war surplus material into tractors needed for local farmers, Lamborghini tractor business was started in a small garage, but the business became really successful and soon thereafter had to move to larger campuses. 

By now Ferruccio had also started tuning Fiat cars; He actually built a Fiat Topolino for himself and entered the Mig Miglia competition in 1948. Ferruccio modified an old Fiat Topolino he had bought in his time. His involvement ended after 1,100 kilometres when he drove the car to a restaurant in the city piano of Turin. Unfortunately, the car was ruined in the accident.

Starting of the Business

The Italian manufacturer decided to form a Lamborghini company with the target of competition with the Enzo Ferrari. It all began after the Second World War when a man gets a Ferrari sports car, in which he noticed that the clutch components were what they used on their tractors. 

For such reasons, he decided to visit Enzo Ferrari to tell him about the problems he had with his car; he could not find a solution, so he decided to make a better sports car than Ferrari. The man was Ferruccio Lamborghini. To serve its purpose, Ferruccio founded the company “Automobili Ferruccio Lamborghini” in May 1963 and hired former Ferrari engineers Gianpolo Dallara and Robert Wallace to design and develop their cars.

The first car manufactured in the company was the Lamborghini 350 GT. It was far better in terms of Ferruccio’s Turin faults. The year 1967 came, and Miura was praised by all the elite media, the prototype taking the brand to a higher level of success. 

His name is due to the Spanish bullfighting livestock as the founder of Lamborghini was fond of bullfighting and hence the brand’s logo. Apart from all their cars, all his car names on these animals.

His Business

During the 1970s, Ferruccio Lamborghini’s companies suffered from financial difficulties.  In 1971, the Lamborghini Trattori, which exported nearly half of its production of tractors, when the South African importer canceled all its orders. 

In 1972, he made major investments to improve the production capacity of his factory, so that a large-scale order from South America could be followed. Sometime later, Lamborghini was informed that the order had been canceled, so the Italian was forced to sell a part of his company to get some of the money spent back.

In the same year, Georges-Henry Rosetti joined the company. In 1973, Ferruccio Lamborghini sold part of the company that was still held by Rene Leimer. 

After Life

In 1974, Lamborghini left the industrial world and retired to a 3 km² (740-acre) property called “La Fiorita” on the shores of Lake Trasimeno in Castiglione del Lago, a town in the region of Umbria in central Italy. 

Later Ferruccio Lamborghini went to live in the vineyard. It was bought a few years ago and enter into the agriculture work. Ferruccio delighted in hunting and making his own wines. Lamborghini also designed his golf course to manage several business interests.

At the age of 76 on 20 Feb 1993, Ferruccio passed away in Silvestrini Hospital in Perugia after getting a heart attack fifteen days ago after a heart attack.

Automative

How to Protect Your Car from Rats and Rodents

Your automobile is your credible friend, roaring, buzzing or noisily to life a day and taking you from place to put. However, did you recognize it may even be an exponent to rats and mice? Rodents are everywhere, and they can do a lot of damage if they attack your vehicle.

These creatures may take shelter under the hood of your engine, particularly throughout the chilly winter and spring days. Automobile engines square measure sometimes heat, dry and undisturbed, providing a perfect shelter for feeding, resting or breeding rodents. 

They may decide that your car is a safe place to build a nest to preserve food. And once there, the rodents will cause substantial harm to the automobile, harm that might find yourself cost accounting you a big quantity of cash. Thus, you don’t really need these annoying creatures within the driving seat. The question is the way to shield cars from rats and mice.

Why Rats Chew Things?

Mice are constantly chewing on things due to manicured teeth. Rat teeth grow unevenly and the risk dying of malnutrition if they do not sharpen them.

How to Protect Car from Rats

  • Parking your car in a closed garage is the best way to keep rats away. Because the small garage area is easy to control. If you do not have a dedicated garage, do not worry as you can use other precautions.
  • Leave your car’s hood up because rodents are looking for a dark place to nest. This idea may help discourage nesting, but may not be the ultimate solution.
  • Remove any food from the surrounding area. Remove any domesticated food, and ensure that the bird’s seed is out of reach from rodents.
  • Remove or hide hiding places near the car. Cut nearby bush and bale where they can hide. If you have a garage, block the rat-shaped entrance of the building, or spray the opening with substances that mice hate.
  • Watch the rodent activity near the car. Keep an eye out for tell-tale signs such as dropping, nibbled paper and disturb rubies.
  • Regularly inspect under the bonnet to see footprints of the rat. This is something that can be done at least once every two weeks. If you get rat footprints, you’ll be happy that you find them before any harm.
  • It becomes difficult for rodents to gain access to the engine. If you use the wire screen to close any opening. Or you can place mouse traps on wheels or around the car.
  • Drive your car once to keep the mice away. The long-lasting car is a perfect target for mice. Also, if you drive your car, you can quickly notice that rats are chewing on your car when something cheap is going on, like your indicators stop working.
  • If you have a pet dog or cat, they are great at cleaning your parking space. Let upon them in the garage whole night. In addition, you can spray harmful odours around the engine. You can use peppermint oil, cat litter, or pet hair to create an unpleasant environment for rodents.
  • Rats have difficulty chewing metal. Therefore, preventing rodents from where rodents could be crawled is a good idea. Metal mesh wrap in areas such as ventilation tubes, wires, and rubber hoses.
  • Ultrasound alarms can disturb rats, making it unlikely that they will nest in your engines. Rodents can hear ultrasounds that we cannot, and it makes them angry. Those with a strobe light such as a mouse blocker or read-a-rat can work longer, as they disrupt the darkness that mice love.

If you are unable to follow these upper steps so there is an alternate method to prevent your car.

Alternate Method

  • An easy home remedy to stop mice is naphthalene balls. Buy a large packet of naphthalene balls and distribute them to your car’s engine bay as well as the boot area to keep the mice away.
  • Alternatively, you can also spray undiluted phenyl in your engine bay which replicates mice as well.
  • Another great solution is raw tobacco. First, from the service center, thoroughly clean the engine bay, then get a generous amount of the bad quality, eat chewing tobacco and splash it in your engine bay.
  • Keep your parking completely free of garbage and disinfect it once every two weeks to keep rats and mice away.

There were a few steps that you should follow to prevent your car from the rats or mice or rodents.

Automative

Top 7 Smallest Cars in the World

Do you know how many cars in the world? Guess

Don’t worry let us tell you. When I am writing this article in 2019. There today more than 1 billion passenger cars travel the streets and roads of the world, and approximately 17 million cars and trucks are sold every year.

There are different types of vehicles and we will discuss the world’s smallest cars. So we love to know, we love to discuss.

Austin Coulson’s car.

Phoenix native Austin Coulson had a dream to make this car. According to the Guinness World Records website, the car is 25 inches high, 2 feet 1.75 inches wide and 4 feet 1.65 inches long. Coulson made the small beast in his garage, incorporating the body of a ‘57 Chevy Bel Air into the construction. He additionally used the engine, transmission, and drivetrain from a road-legal quad. It can not go over 25mph speed.

This small vehicle is full of features that you would normally associate with a traditional size ride: 9 inches by headlights, taillights, turn signals, rearview mirrors, seatbelt, a horn, and a 3-inch windshield. The vanity license plate reads “I’M BIG.” The exterior of the Jeep was inspired by the American U-51 Mustang military aircraft. Coulson also inscribed the sides of the jeep with the tail numbers of a World War II-era ship his grandfather worked on.

Peel P50

Peel P50 is one of the world’s smallest cars which is designed by Peel Engineering in 1962-1965 and remanufactured in 2010. It is a three-wheel car It is so small in fact, that it held the title of Guinness Book of World Record for the “smallest production car” for over 50 years. The Vintage Peel P50 is a great collector’s item with the character: it has no reverse gear, but a light car (250 lbs) can be picked up and carried if you want.  This small car holds the World Record for the smallest car for half a century. With a door and a headlight, Peel Engineering believes it is a symbol of automotive minimalism. Its speed can reach up to 38 mph. It has one cylinder with a single seat and the engine is placed at the front side which uses petrol to run.

Fuldamobil N

The original design of the car was conceived by Norbert Stevenson, a freelance journalist. These small cars manufactured by Electromassinchenbau Fulda GmbH of Fulda, Germany from 1950 to 1969, which length was 1.397 meters. The Norbert Stevenson design concept was for a very simple three-wheel car with room for two people, would have two wheels up front for stability, and would be powered by a smaller engine at the rear.

Eshelman Sport Car

This car was named and designed by the Cheston Lee Eshelman. It is probably the smallest car in the world in terms of width; The Adult deLuxe version is only 24 inches (610 mm) wide. Eshelman was very good at producing children’s cars as well as airplanes and tractors. The Eshelman Adult Sport Car de Luxe is worth € 20,000 today.

Isetta

BMW Isetta is a little car which length is 90 inches and width is 54.30 inches. This smallest car is manufactured by the BMW company from 1955-1962. Isetta car has different models which speed can reach up to 53mph to 80mph. The BMW 1955 version of the Isetta was the best-selling single-cylinder car in the world. It has a door at the front side near the steering. Its engine is 248 cc which is placed near the backside wheel. Isetta became so popular because of the shortage of materials due to the Second World War in those days.

Brütsch Mopetta

At the 1956 International Bicycle and Motorcycle Exhibition, Egan Brush needed a small car. And the Result: Mopeta. Ellipse-shaped, single-seat three-wheelers. The 1958 Mopetta – the final version, unfortunately – was 1.70 meters long and 0.88 meters wide. Its weight was only 78 kg. Only 14 Mopettas were built, and today only 5 are known to with the time. For a short time, it looked like Opel would be going to distribute the car commercially, but since they never did, it is now a great collector’s item!

Pasquali Riscio

The Pasquali Riscio is a small Italian three-wheeled electric car named Indian rickshaw in Italian. It is a small electric car which can run 50 kilometers on a single charge. Riscio comes in two different variants of single-seater and double seater and it can reach up to a speed of 40 kmph. 

The length, width, and height of the Riscio are 2.19m, 1.15m, and 1.50m.

Weight is 360kg.

Recharging time is 8 hr

Energy consumption is 0.11 kW/h/km

Battery 220

Because you can charge it with a normal household electric plug so in Italy it has no road tax for the first five years.

Automative

Servel tips to Prevent Engine from Overheating

You may love the warmth of summer, however, you wish to assist keep your automotive cool because the temperature rises. An engine that runs too hot can damage the vehicle and endanger your safety.

If you notice the temperature gauge of your vehicle crawling in a hot area, try not to panic. There are many reasons that can cause a vehicle to warm over, but the most common problem is low coolant levels and it is easy to remedy.

Inspect the coolant level

coolant

To monitor the coolant level, open the hood and find out the coolant reservoir. The coolant level is shown by the indicator lines on the reservoir. If too low, simply re-add the appropriate amount of coolant. Engine coolant is often sold as a 50/50 mixture of water and coolant. You can also purchase a concentrated coolant and can mix with water yourself. 

One of the best ways to protect your car’s engine from overheating is to regularly check the coolant reservoir and radiator. This way you can ensure that your car has sufficient coolant and water. Low coolant is one of the most common reasons that will overheat a vehicle. 

Check Leakage

After pouring water and coolant, monitor the temperature of your car before exiting again on the road. If it is still growing, chances are your car may have a leak. The coolant may leak from the radiator, hoses, freeze plugs, heater core or intake manifold gasket. If you check for regular maintenance, you can protect your car’s engine from overheating.

Check after adding coolant

After adding coolant, start your vehicle and check the temperature gauge. If it has come to the original level, then it should be safe to continue driving. However, it is best to have your mechanic inspect your vehicle as soon as the ability to confirm that there are no additional problems

Coolant System should be Flushed

You should flush your coolant system after everyone and two years. Even if you have never got warming problems, flushing your cooling is a vital part of regular maintenance. It will eventually become dirty and will need to be replaced. Make sure that your mechanic checks the pH level of your coolant.

Inspect your Temperature Gauge

Drivers often look at the fuel gauge and hope that it is not near the empty mark. Some use temperature gauges, which are an essential tool to help prevent engine heat. Located on the dashboard, the device has a needle that must always be pointed to the center. If it indicates heating up, turn off the engine and allow the car to cool down. If you have leaked coolant or the temperature gauge of the vehicle has not returned, do not conceive to drive your vehicle.

Avoid parking on Sunlight

Parking within the shade not solely keeps your car cool, however, it can even prolong the lifetime of your automotive.

Keep Sun Shade

Having a sunshade in the car is helpful because you cannot always guarantee that you will get a shaded or covered area to park. These UV heat shields will protect the interior from overheating, plus it protects your interior from the harmful effects of the sun.

Check Blockage

Check for the airflow blockage to your radiator and also check the cooling fans. Proper airflow is compulsory to cool your vehicle’s engine. Make sure nothing is preventing air from flowing through your radiator. Then, inspect your cooling fans to see if they are working properly. Additionally, if the wings on your radiator are bent, it can prevent your car from cooling properly.

Check Water Pump Leakage

A malfunctioning water pump including overfitting engines can create all kinds of issues. Check for leaks in and near the water pump. If you see any, try to change the gasket first. If that does not work, replace the water pump. 

You may hear a loud noise when your vehicle is running as the pump dries. Try adding coolant to the maximum fill line to see if this solves the problem. Dirty coolant and corrosion can cause the water pump to fail, in which case you will need to replace the pump.

Automative

History Behind the Internal Combustion Engine

The first internal-combustion engine, according to our internal thoughts, was that of Robert Street, invented in 1794 in England. The bottom of the cylinder was heated by fire and a small amount of tar or turpentine was projected into the heated part of the cylinder, creating vapor.

The piston was sucked into a volume of air to form the blast mixture and also the flame for ignition. Around 1800 Phillippe Lebon invented in France which uses compressed air, compressed gas, and electricity for ignition. 

Some officials believe that his early death retarded the development of internal-combustion engines in half a century, as all of the described features are essential for today’s highly efficient engines, although they did not remain in use for three-quarters of a century after his death.

Internal Combustion Engine

Browns Vacuum Engines

The next engine to achieve any considerable prominence was Samuel Browns, who acquired several patents in England in 1825.

His engine did not represent an advance, as Huygen’s old ideas were employed rather than advanced views of the Street. The success of the atmospheric steam engine was probably responsible for this. Brown’s engine included several large chambers. In which hot gases are cooled by flame, by injection of water, thus a partial vacuum is formed. Pistons to operate in cylinders adjacent to large chambers were driven by atmospheric pressure, all pistons being linked to the same crankshaft.

Since the burning cylinder was not in work, the engine can be called an internal combustion engine in the accepted sense of the word. The inventor appears to be a man of considerable force, and many of his engines were built for pumping and driving cars and boats.

Wright’s Engine

In 1833, Wright invented in England, the engine. In which gas and air were supplied to a working cylinder by separate pumps. The charge was contained in spherical bulbs near the ends of the cylinder, ignition occurs when the piston is at the end of the stroke. The engine was double acting, water-jacketed, with a poppet exhaust valve and fly-ball governor. It represented a great advance in design and was probably made, although no record of its performance exists.

William Barnet Engine

In 1838, William Barnett patented an engine in England that was an advance on earlier variants in that country. It compresses the gas and air separately, igniting the mixture when the piston was at the end of its stroke. The third engine described by this inventor is interesting. Because it embodies many features of modern two-cycle engines. 

The piston is supposed to be moving upward, compressing the mixture of gas and air. Ignition occurs when the piston has reached its highest position, and the piston went down, expansion occurs until the piston crosses the exhaust port in the middle of the cylinder. During the latter half of the stroke, the pumps force gas and air into space below the piston. Compression being completed by the working piston and an explosion when the piston reaches its lowest position.

Barsanti and Matteucci Engine

The engine of the Barsanti-Matteucci engine was made in 1857. This is interesting because it shows a type of machine that was the first to achieve real commercial success. However, this does not happen for his Italian inventions.

In this engine the gas and air exploded under the piston, which was operated upward, finally came to rest when all the work of the blast was done. The piston did this descending under atmospheric pressure. 

Lenoir’s Engine

The engine in 1860 invented by Lenoir in France was the first engine to attain considerable use. In general, it was a double-acting steam engine, with a slide valve for entry and another for exhaust.

This engine was well advertised and received considerable use. However, its economy was not very good. It was considered sufficient merit to secure the awards from the Exposition of London in 1862, Paris in 1867 and Vienna in 1873. improvement in the engine gave its inventor some prominence, but its success was Ephemeral, as the new Otto-Langen free-piston engine. Which was exhibited at the Paris Exhibition in 1867? 

The Lenoir engine recruited gas and air for part of the stroke, which was followed by an explosion and then an extension. In 1860, Beau de Rochas stated the necessary conditions for the efficiency of internal combustion engines as follows:

  • The largest volume of a cylinder with a given surface of the circumference.
  • The higher the possible velocity of the motion.
  • Largest possible expansion.
  • The largest possible pressure when the expansion begins.

Otto Engine

The famous Otto engine was invented by Dr. Nicholas Otto and was patented in 1877 in Germany. This follows the cycle described by Bue de Rocha, now known as the four cycles, or sometimes as the Otto Cycle. The engine was previously known as Otto-Silent, separating it from the free-piston engine, which was noisy.

It immediately installed an internal-combustion engine on firm-footing, and the four-cycle type engines sold today show only minor improvements. In 1876 the sliding valve is replaced by poppet valves. And the spark of electricity has been replaced by flame ignition. Otherwise, the Otto cycle of 1876 continued and thousands of them are currently being formed.

The development of diesel engines for oil in 1894. As stated, this engine is similar to the Brayton. The air is compressed to about 500 pounds of pressure and the oil is sprayed into this highly compressed air. It burns spontaneously under almost constant pressure, followed by a long extension. Extremely high air temperature before fuel injection and high temperatures were maintained during this injection, with a long extension, give the engine the highest efficiency of any thermal motor.

The development of the diesel engines has been so recent that it is not necessary to elaborate on it. At this time, it is being manufactured in all European countries and the US and is a trend on the part of many American manufacturers who are bringing new engines to adopt diesel features. The gas turbine is still in the experimental phase. A number has been made and are of course, extremely interesting. 
The achievement of the steam turbine has stimulated many to trust that the gas turbine will achieve similar success. Nothing of recent development can be said to encourage this view, the in the way of successful gas turbines are enormous, and some turbines are designed and built to run, neither of them has shown efficiency compared to ordinary four-cycle engines.

how to buy a used engine
Automative

How to Buy used engine tips and techniques

When your car engine gets spoiled, buying a second-hand car can be a good idea but not always. So, you think of buying a new engine for your vehicle. But you realize that your vehicle is an old model and the new engine will not suit you.

The second thing which comes in your mind is to buy a used engine. That is a brilliant idea. But there are certain things which you must consider before buying a used engine. You should check the engine carefully before buying it.

How to check the car engine condition?

We are here to help you understand the things which you must consider before buying a used engine. 

So without wasting time let’s start.

Note Down VIN Number before going to the seller

When you buying the used engine always check the VIN (Vehicle Identification Number) and the engine number of the engine. You don’t have to tell the seller different shapes. Such as how your engine looks like and neither needs to bring your heavy (engine) to shop. 

If you go to the seller without a VIN number. Then there are few possibilities to find the exact engine for your vehicle. But after some research, if the seller finds the same size engine, then the least chances to fit your vehicle.

To avoid these situations, VIN and Engine Number help you, to find your engine which will fit in your vehicle. Now, you can bring your used engine for your vehicle, but wait doesn’t bring it now without checking proper function.

There are many functions are left for checking, let’s do it step by step.

Always buy Complete Assembled Engine.

Always buy the complete assembled engine from the seller as it is shown in the image. If you are not a professional in assembling so never buy disassembled engine by mistake. Because there are various types of parts and components in the engine which has a different model. If you are not a professional this will waste your time and irritate you. It may happen from morning to night to assemble it. So the intelligence is to buy a completed engine.

But the topic does not end here. You should check complete sensors, wiring harness, valve covers, charge pipes, fuel rail, and injectors. Also, check their important functions are working or not, like starter, AC compressor, power steering pump, and alternator. 

Also, ask about the history of the engine, how many kilometers the engine has run. Is the engine faced an accident or not when we’re the last time. It has run and many more questions that come in your mind. These questions will help you to guess the actual condition of the engine. And the important thing to remember doesn’t buy the engine in which standard mileage is below 20000 kilometers per year.

Ask the seller is the engine has a long block or short block.

Both the engines are the same in size but there are some differences, which we will tell you.

Short Block Engine.

The Short Block engine is the end of a vehicle’s engine. It is a partially assembled engine that has the cylinder block below the head gasket but above the oil pan. It includes crank, engine block, connecting rods, and pistons. This engine has a focus on the bottom and end rotating components.

Long Block Engine

Long Block engine is the complete version of the short block engine. It includes a valve train, cylinder head, valve covers, crankshaft and cylinder head, and other components. It does not require the fuel system components such as fuel pump, fuel injector, and intake manifold. This is the completely assembled engine.

Comparison Long Block v/s Short Block engine

A short block engine has less price than a long block engine. A long block engine has a longer warranty than a short block engine. The long block engine is more reliable than the short block engine because it has more components. And the final result comes out the long block engine is more powerful than the short block engine.

So try as much as possible to buy a long block engine. But to buy a short block engine is not too bad.  

If you have asked the questions, let’s check it practically. 

Always try to check the engine in the morning because the engine was at eight or nine hours at rest. Cold investigation can display all hidden problems.

If the engine starts in two or three takes it means that it is in good condition. If the engine does not start in more than three trials, do not waste your money on it.

It will take some time on cold checking. If the engine throws a few white clouds of smoke while starting the engine that’s not a problem. Every used engine suffers from this condition in the beginning.

If you see the engine is exhausting blue smoke and making loud noises that means the engine is burning oil. This happens because of improper maintenance, leaking oil and not changing lubricating oil and its filter timely. Burning oil can harm the engine or burn the internal components of the engine.

Check properly the engine you are going to buy not consuming excess lubrication oil than normal. If it consumes you will see leakage first, but in case of internal leakage, you are not able to find.

Bad quality oil, old engine, and high-pressure oil usage are the reasons which force the engine to consume excess oil.

Check the oil leakage in the engine properly.

The engine is the heart of the vehicle. The engine oil is the blood, just think if your heart not pumping blood properly what will happen. The same thing in the engine. Avoid the engine if there is a low level of oil. Check the engine carefully under the oil cap after removing it.

To check the oil leakage in the engine. Keep your eyes on the dipstick and check the overflow or low level of oil. When you pull out the dipstick and see there is a lot of black carbon in it. That means the engine has not passed from good services. Oil Pressure Testing is necessary to check the clearance flow of oil. Check the lower part of the engine, everything has to be dry.

Basic Engine Test

All types of tests are necessary to do and the Basic Engine Test is one of them.

  1. Check for sludge in the oil. If you see sludge outside of your engine it is a problem. Remove the oil cap of the oil pan, turn on the light and see inside it. Don’t buy the engine if you see the metallic and a silver portion of the engine it represents sludge engine. A good engine will always be covered with lubrication oil.
  2. While performing the cold test with engines try to listen carefully. If you listen to abnormal sounds like two metals are colliding with each other, refuse to buy.
  3. Open the engine hood for checking,
  • Air cleaner clogging.
  • Hoses for leaks
  • Gasket and valves
  • Improper connections of harness connectors, wiring harness, and vacuum hoses.
  • Refuse to buy if you smell like burnt oil.

Make sure the engine getting normal temperature while running not getting over. If your engine is overheating in normal weather that means the coolant system of your engine is damaged. If the needle on the temperature pushes its way towards the red zone it may be a sign of overheating.

Don’t forget to check the exhaust fan and other fans are working properly or not. Improper working of fans can create many problems like overheating.

Unusual vibration in the engine may be harmful to your vehicle. About this, we have already told you in Basic Engine Test. This sound can be the collision of metal in your engine and can damage internal parts soon.

If you find some little problem in the engine tells the seller immediately to repair or replace the faulty part.

Check from Borescope Inspection Camera

Borescope camera will help you to detect the internal failure of the engine’s parts and components such as bearings.

Are your components clean or not? Is there is excess carbon or not? All you can see on the screen of the Borescope. Put the wire in parts from were light blue light is emitting and it will display internal conditions of components. If you have not this, you can purchase it from the market.

Spark PlugInspection.

Increasing high voltage and the gap of the bridge between the ground electrodes. The center can spark the fire inside the cylinder. And the secondary purpose of Spark Plug Inspection is helping the heat away from the cylinders.

 If you see red coating in the spark plugs, this is not a problem. But the spark plug gets too hot that is the sign of pre-ignition damage.

Check Compression on your engine.

It will check the condition of your cylinder. If the engine has low compression it causes may be Holes in a piston. The worn timing chain which is connected to the crankshaft, bad piston rings (due to overheating of the engine).

This test will help you to detect the leakage of pressure from rings, cylinders, and valves.

While checking the compression, your engine pressure should be 100 PSI. If it is showing the 10% variation around 100 PSI this is not the issue.

Check the coolant and the other leakages.

If you see the coolant leakage from the radiator tell the seller to remove it and place the new radiator. Because sometimes a broken or cracked radiator can create unwanted serious problems. To avoid these situations refuse to buy or remove.

Tell your sellers, you want to check your engine dry. Because some of the sellers use automatic transmission fluid and thick oil to conduct the compression test which is temporary.

Now you have completely checked the functions of the used engine. But one thing is still left.

After checking the used engine functions properly fix it in your vehicle. Then, take a test drive which will clear the rest of the doubts.

These are some points which will help you to before buying used car engines. We hope you like it.

Conclusion:

Buying a used engine helps to save you a lot of money and give a new life to your car. After reading this article, you will understand how to buy the used engine and what things you have to kept in mind while purchasing the used engine.

PreviousNext

You Want To Have Your Favorite Car?

We have a big list of modern & classic cars in both used and new categories.

  • Conact Us